A quantity rises by 50 percent and then falls by 50 percent. The average of those two percentage changes is zero, yet the quantity does not return to where it began. The second percentage acts on a different starting amount.
Use an invented index that begins at 100. A 50-percent rise takes it to 150. A 50-percent fall then takes 150 to 75. The two changes correspond to multiplying by 1.5 and then by 0.5, so the combined multiplier is 0.75.
Find the repeated multiplier
The geometric mean asks which single positive multiplier, applied twice, would produce the same result. For these two periods it is the square root of 0.75, approximately 0.866. Applied to 100 twice, that gives 75. Expressed as an equivalent change per equal period, it is about a 13.4-percent decrease.
This calculation answers a different question from the arithmetic mean. Adding the two rates and dividing by two describes their simple average. Multiplying their growth factors and taking the appropriate root describes the constant compounded factor with the same overall effect.
| Question | Calculation in this example |
|---|---|
| What is the simple average of the stated rates? | (50% − 50%) ÷ 2 = 0% |
| What is the combined multiplier? | 1.5 × 0.5 = 0.75 |
| What equal multiplier reproduces both periods? | √0.75 ≈ 0.866 |
The calculation does not tell you that the path was smooth. The actual series still rose sharply and then fell. An equivalent compounded rate compresses that history; it does not erase the variation that someone experienced along the way.
Before accepting an “average growth” headline
Check whether the periods have equal length, whether the calculation uses positive growth factors and what the reported average is intended to describe. Do not take the geometric mean of the signed percentage numbers themselves. Zero or negative underlying values require particular care and may make the usual calculation inappropriate.
Keep the start and end values beside the average. If the headline’s number cannot be reconciled with them under its stated method, ask for the calculation before deciding that the trend has been explained.

